Fresco Systems Australia
Security Services in Hume

The densifying deck provides vibration to the base of the bulk bag during the filling process, ensuring the product is deaerated as the bulk bag fills, providing a settled and compact bag. Once the bulk bag has reached it’s end destination the bulk bag is discharged using a Fresco bulk bag unloaded. This also allows the operator to accessible a bag during release if only piece of a bag is required. The Fresco bulk bag fillers and unloaders are fully engineered, independently tested and certified as lifting equipment. Weighing solutions are a major part of process systems and Fresco has designed solutions from trivial 5kg lofty accuracy weigh hoppers to important 150tonne silos. Fresco then designed and quoted a system that would permit the client to diminish the physical handling of the product while maintaining a continuous throughput, thus both reducing costs and improving productivity. Fresco Systems have designed a solution for the safe discharging of bulk bags in a clean, dust free environment. Dust Release Bulk Bags are loaded in to the bulk bag unloaded by forklift or electrical hoist and trolley. This creates an air curtain at the spout of the bulk bag and a vacuum within the vacant bulk bag collapsing the bulk bag so when separate from the bulk bag unloaded it can be disposed of without bellowing dust and air into the environment as the operator folds the bag for disposal or recycling. Fresco Systems designs, manufactures and install process system in house providing a vast deal of flexibility with adapting their standard designs to face each customer’s specific requirements. Fresco Systems can change materials of construction, finishes, heights etc and adapt the discharge of the bulk bag unloaded allowing materials from the bulk bag to be directly discharged in to packing machines, flexible or pneumatic conveyors, hoppers etc. Their processes require batching from bulk bags as raw materials and then filling bulk bags as finished products. For these types of materials, applications where normal design does not provide an warranted solution and retrofit situations where operating difficulties are encountered, discharge aids or release systems are often old to secure release and vacant the contents of silos. A feeder and its supply hopper are therefore an integral system. These inject air only when release is required. Air cannons (or blasters) are designed to inject blasts of lofty pressure gas, (up to 10 bars), in a concise duration (typically fractions of a second). Air cannons must be located where the stored material can be moved into an vacant flow channel. If you have a challenge, a problem or honest questions about any bulk materials handling system or equipment, no matter how large or small, Fresco Systems is here to help. There also times when you know your bulk material handling objectives but not the optimal solution. Having Fresco Systems undertake the entire project including Project Management, Installation, Commissioning and Training, helps to ensure a seamless incorporation of equipment into your facility, whilst integration and interface risks are also reduced. On completion of commissioning, Fresco Systems will deliver staff training, including operations, mechanical and electrical maintenance to ensure your team has a full accepting of the Fresco equipment. As the manufacturer, Fresco Systems can. As a manufacturer of fully automated bulk materials handling and process systems Fresco Systems knows how to confront your requirements without compromising on quality and exceeding your budget. Air Fluidisers urge the flow of product from bins, hoppers and silos by breaking the product cohesive shear between the particles and the vessel wall.